Home > News

products

Piston Ring
Piston
bearing
Timing Kit
Cylinder Liner
Crankshaft
Marine piston ring
Timing chain cover
Cylinder Head
DPF

Commonly used 12 stainless steel grades and properties Part 2

2022-08-22

 6. 316H stainless steel. The internal branch of 316 stainless steel has a carbon mass fraction of 0.04%-0.10%, and its high temperature performance is better than that of 316 stainless steel.
 
7. 317 stainless steel. The pitting corrosion resistance and creep resistance are better than 316L stainless steel, which is used in the manufacture of petrochemical and organic acid corrosion resistant equipment.
 
8. 321 stainless steel. Titanium-stabilized austenitic stainless steel, adding titanium to improve intergranular corrosion resistance, and has good high-temperature mechanical properties, can be replaced by ultra-low carbon austenitic stainless steel. Except for special occasions such as high temperature or hydrogen corrosion resistance, it is generally not recommended for use.
 
9. 347 stainless steel. Niobium-stabilized austenitic stainless steel, adding niobium to improve intergranular corrosion resistance, the corrosion resistance in acid, alkali, salt and other corrosive media is the same as 321 stainless steel, good welding performance, can be used as corrosion-resistant material and anti-corrosion Hot steel is mainly used in thermal power and petrochemical fields, such as making containers, pipes, heat exchangers, shafts, furnace tubes in industrial furnaces, and furnace tube thermometers.
10. 904L stainless steel. Super complete austenitic stainless steel is a kind of super austenitic stainless steel invented by OUTOKUMPU in Finland. , It has good corrosion resistance in non-oxidizing acids such as sulfuric acid, acetic acid, formic acid and phosphoric acid, and also has good resistance to crevice corrosion and stress corrosion resistance. It is suitable for various concentrations of sulfuric acid below 70 °C, and has good corrosion resistance in acetic acid and mixed acid of formic acid and acetic acid at any concentration and temperature under normal pressure. The original standard ASMESB-625 classifies it as nickel-based alloys, and the new standard classifies it as stainless steel. There are only similar grades of 015Cr19Ni26Mo5Cu2 steel in China. A few European instrument manufacturers use 904L stainless steel as the key material. For example, the measuring tube of E+H's mass flowmeter is made of 904L stainless steel, and the case of Rolex watches is also made of 904L stainless steel.
 
11. 440C stainless steel. Martensitic stainless steel has the highest hardness among hardenable stainless steels and stainless steels, with a hardness of HRC57. Mainly used to make nozzles, bearings, valve cores, valve seats, sleeves, valve stems, etc.
 
12. 17-4PH stainless steel. Martensitic precipitation hardening stainless steel with a hardness of HRC44 has high strength, hardness and corrosion resistance and cannot be used at temperatures above 300°C. It has good corrosion resistance to the atmosphere and diluted acid or salt. Its corrosion resistance is the same as that of 304 stainless steel and 430 stainless steel. It is used to manufacture offshore platforms, turbine blades, valve cores, valve seats, sleeves, valve stems Wait.