Home > News

products

Piston Ring
Piston
bearing
Timing Kit
Cylinder Liner
Crankshaft
Cylinder Head
Dpf Cleaning Machine

Cylinder Liner For Mitsubishi S6r2

2024-09-27


 The outer wall of the wet cylinder liner is in direct contact with the coolant, the wall thickness is 5~8mm, the radial positioning is achieved by using the upper and lower positioning ring, and the axial positioning is realized by matching the upper flange of the cylinder liner with the corresponding supporting surface on the top of the body. The advantages of wet cylinder liner are that there is no sealed water jacket on the body, easy to cast, good heat transfer, more uniform temperature distribution, easy to repair, and the cylinder liner can be replaced without removing the engine from the car. The disadvantage is that the stiffness of the body is poor and it is easy to leak.The inner surface of the cylinder is easy to wear due to the action of high temperature and high pressure gas and the contact with the high-speed moving piston. In order to improve the wear resistance of cylinder and prolong the service life of cylinder, there are different cylinder structure forms and surface treatment methods. There are three types of cylinder structure: no cylinder liner type, dry cylinder liner type, wet gas cylinder liner type.