Home > News

products

Piston Ring
Piston
bearing
Timing Kit
Cylinder Liner
Crankshaft
Cylinder Head
Dpf Cleaning Machine

How To Judge Whether It Is The Valve Oil Seal Or The Piston Ring Caused By The Oil Burning?

2021-09-10

"Burning engine oil" means that engine oil enters the combustion chamber of the engine and participates in the combustion together with the mixture, resulting in rapid engine oil loss and oil leakage. The most common problems that often cause the engine to "burn oil" are valve oil seals and piston rings. So what if we judge whether it is the piston ring problem or the valve oil seal problem? Let's take a look together.

First of all, let's first understand the cause of burning oil

1. Valve oil seal
①The valve oil seal is not pressed against;
②The gap between the valve guide and the cylinder head is large;
③Abrasion of valve oil seal, excessive wear of valve stem and valve guide;
④The valve oil seal is aging, causing the oil to flow along the valve stem to the combustion chamber, causing oil to burn.

2. Piston ring
① The piston ring is installed upside down;
②The piston ring is not staggered according to regulations;
③The outer diameter of the piston ring is too small and the clearance between the cylinder diameter is large;
④In the process of maintenance and use, carelessly clean the piston ring, piston and cylinder wear;
⑤The piston ring has poor wear resistance and premature wear, causing the oil to enter the combustion chamber and burn the oil;
⑥ Piston and cylinder barrel wear The gap between the piston diameter and the cylinder barrel exceeds the specified value.

3. Other reasons
① The corrugated ring is not installed in place, causing groove marks on the engine cylinder;
② Carelessly scratch the cylinder wall during assembly;
③The engine is hot; (do not check the lack of oil or lack of water)
④The lubrication effect of engine oil is poor;
⑤Do not warm up the car and cause abrasion;
⑥What are the methods for judging the burning of oil when the gasoline pump enters the combustion?


 
There are three types of car oil burning (respectively, burning engine oil in cold car, burning engine oil when accelerating and burning engine oil at any time)

1. Judgment method of valve oil seal burning oil
1) Ways to add and release the throttle;
2) Serious carbon deposits and blockage of the three-way catalyst;
3) If the exhaust is thicker blue smoke, it means that the vehicle has already burned engine oil. If the blue smoke disappears after the car is hot, this type of engine oil is a cool engine oil. (This is because the valve oil seal is aging or damaged, resulting in poor sealing effect, and the oil enters the cylinder from the valve).

2.​The judgment method of piston ring burning oil
1) After the car is hot, whether it is a rapid acceleration or an idling process, as long as the speed rises rapidly, blue smoke will be emitted from the exhaust pipe. This type of rapid acceleration burns oil. (The rapid acceleration of oil burning is mainly due to the poor sealing effect between the inner wall of the cylinder and the piston ring, which causes the oil to enter the combustion chamber directly from the crankcase);
2) When measuring cylinder pressure, if there is a problem with the piston ring, the amount of wear can be judged by the cylinder pressure data (if it is not very serious, or the problem of a certain cylinder, by adding a repair agent, it should be automatically repaired after 1500 kilometers).

3. Judging methods for other reasons
Once started, blue smoke can be seen. At this time, the engine oil is already very serious, and there may even be a safety hazard. This type of oil is burned at any time. (The engine is severely worn, resulting in lax sealing, which provides favorable conditions for burning oil. At this time, it must be repaired urgently to avoid more serious failures and damages)